The stylish new Stamford mailbox.
This letterbox uses a conventional and discrete letter plate but still has the same large capacity as our other post boxes. Your mail is delivered through the wall via a heavy duty chute attached to a traditional style letter plate and contained in a sealed storage box with a rear lockable access door.

Designed to be fitted through:

Single brick walls
Double or cavity brick walls
Brick piers.

When built into a cavity wall or pier, the mail is securely stored within the cavity area allowing both the front letterplate and back casting to fit flush against the brickwork or rendering.

Extremely secure design
Standard size has ample capacity for all your mail and newspapers
Customised case sizes available to fit any depth wall or pier up to 1000mm
Choice of polished brass, chrome, brushed chrome or textured black letter plates
Supplied complete with 2 keys

Please note for 2 brick square piers the bricks either side of the box will need to be cut to accomodate the collection box.

Sectional view of the LS10 mailbox through a brick pier showing operation

Rear view of the Stamford postbox fitted through a brick pier

Sectional view of the letterbox fitted through a double brick wall showing operation

Rear view of mailbox shown fitted through a brick wall

Sectional view of the Stamford postbox shown fitted through a single brick wall

Textured black letter plate for the Stamford mailbox

The Stamford letterbox is also available with a brushed chrome letter plate

Polished brass letter plate, suitable for the Stamford post box

Polished chrome letter plate for the Stamford letter box

LS10 Letterbox Dimensions

The Stamford mailbox is designed to be installed into single, double and cavity brick walls in addition to brick piers up to 1000mm thick. There are different fittings depending on the depth of the wall or pier. The dimensions of all the fittings are shown below.

Shown below are the dimensions of all the Stamford postbox models. Dimensions are in mm

	Letter plate These are the dimensions of the post flap supplied with the LS10. This post flap is shown in brass but is also available in textured black and polished or brushed chrome. A = 305mm, the overall width of the letterplate. B = 96mm, this dimension is the overall height of the letterplate. C = 57mm, the height of the letterplate orifice. D = 233mm, the width of the letterplate orifice
	Single wall and brick piers chute assembly The single wall chute dimensions are shown below, the chute can accommodate wall thicknesses between 100mm and 112mm. The post flap above is not shown fitted, but when assembled it is attached to the front of the sleeve. This sleeve is used for all depths except double or cavity brick walls. H = 78mm, the overall height of the sleeve, the hole in the brickwork would need to be approximately 82mm. W = 248mm, this dimension is the overall width of the chute, the hole in the brickwork should be around 252mm.
	Double and Cavity wall chute assemblies The double and cavity wall chute dimensions are shown below. The double wall chute can accommodate wall thicknesses from 200mm to 225mm, whilst the cavity wall chute fits wall thicknesses from 272mm to 297mm HF = 78mm, the overall height of the front of the sleeve, the hole in the front brickwork would need to be approximately 82mm high. HB = 113mm, the overall height of the gap at the rear, the hole in the rear brickwork should be cut to about 120mm W = 248mm, this dimension is the overall width of the chute, the width of the holes in the front and rear brickworks should be around 252mm.
	Collection Box The collection is located within the cavity area when fitted into a brick wall or pier, for a double or cavity wall the box is located at the rear. A = 80mm, the height of the opening for a single wall depth chute. A = 115mm, the height of the opening for the double or cavity wall depth chute. B = 250mm, the width of the opening. D = 242mm, the overall depth of the standard size collection box, used for single, double or cavity brick walls. See below for details of sizes for cases to fit deeper walls or piers. H = 425mm, the overall height of the collection box. W = 295mm, this dimension is the overall width of the collection box. X = 286mm, the distance from the bottom of the letterbox casting to the bottom of the letter opening for a single wall depth chute. X = 251mm, the distance from the bottom of the letterbox casting to the bottom of the letter opening for a double or cavity wall depth chute.
	Collection Box Sleeve Shown below are the dimensions of the inner sleeve of the standard size collection box. A = 402mm, the distance between the bottom face of the sleeve and the top of the apex, the overall height of the letterbox sleeve is taller as the sides extend below the bottom by 13mm making a total depth of 425mm. These extensions to the sides are generally bedded into the mortar when being built into a brick wall or pier. B = 383mm, the distance between the bottom of the sleeve to the top of the side before the apex begins. The apex of the sleeve rises 20mm from the side to the peak in the centre. C = 397mm, the dimension of the side of the sleeve from the very bottom to the lower point of the top apex. D = 230mm, the depth of the standard size sleeve. See below for details of sizes for cases to fit deeper walls or piers. E = 275mm, this is the width of the sleeve. F = 13mm, this dimension is the distance between the bottom of the sides and the floor of the mailbox sleeve.
	Rear Access Door Below are the dimensions of the rear access door of the LS10 Stamford rear retrieval postbox. A = 180mm, this is the width of the rear retrieval doorway B = 185mm, this is the height of the rear door entrance The diagonal distance of the letterbox opening is 257mm, easily big enough to remove A4 or large packages. A telephone directory sized package can be removed from the letterbox without needing to be bent in any way.
	Sleeves for deeper walls The standard case size is designed for single, double or cavity walls and 1½ brick* walls or piers. In addition we have standard size cases for 2, 2½ and 3 brick* walls. For other depth walls or piers we will need to manufacture a sleeve to suit. To make the correct size we require two dimensions as shown below. A, the thickness of the brick (this is 102mm for a standard metric brick). B, the overall depth of the wall or pier from the outside faces. * Based on a standard metric brick (215mm)

Shipping weight:

9kg for standard size model.

Overal dimensions:

295mm wide, 425mm high, 250mm deep (front to back, this can be extended up to 900mm)

Letterplate aperture

230mm wide x 53mm high

Components:

The front letterplate is made from solid brass and left polished or coated in a choice of polished chrome, brushed chrome or textured black finishes. The rear casting including the door is cast from pure aluminium in English foundries, whilst the main body is made from sturdy electro zinc coated steel. To ensure it's long lasting appeal, these components are thoroughly cleaned and primed before being phosphate treated and coated in a durable top quality low bake enamel in a choice of colours. All additional components (excluding lock) used are made from solid brass or stainless steel and assembled in England.


	LS10 single wall/pier instructions


	LS10 double/cavity wall instructions

Name:		*
Email:		*
Phone:		*
Address Line 1:		*
Address Line 2:
Town:		*
Postcode:		*
Country:

Name:
Email*:
Phone:
Question:
Contact me via:

Stamford Rear Access Mailbox

LS10 Letterbox Dimensions

Shown below are the dimensions of all the Stamford postbox models. Dimensions are in mm

Letterbox Security

Postboxes For You

Corporate Mailboxes

Letterbox Info

Mailbox Portfolio

Cast Post Boxes

Outdoor Letter Boxes

Postboxes for Homes

Mailbox Manufacturers

Letterbox help