The vertical letterplate Jubilee mailbox.
This letterbox uses a vertical conventional and discrete letter plate but still has the same large capacity as our other post boxes. Your mail is delivered through the wall via a heavy duty chute attached to a traditional style letter plate and contained in a sealed storage box with a rear lockable access door.

Designed to be fitted through:

Single brick walls
Double or cavity brick walls
Brick piers.

When built into a 2 brick pier (or larger), the mail is securely stored within the cavity area allowing both the front letterplate and back casting to fit flush against the brickwork or rendering.

Extremely secure design
Standard size has ample capacity for all your mail and newspapers
Customised case sizes available to fit any depth wall or pier up to 1000mm
Choice of polished brass, chrome, brushed chrome or textured black letter plates
Supplied complete with 2 keys

Sectional view of postbox in a brick piershowing operation

Rearb view of the LS14 Jubilee postbox

LS14 with chrome letterplate in a brick wall

Rear view of Jubilee mailbox fitted in a double brick wall

Sectional view of postbox through a double brick wall

Rear view of a Jubilee mailbox fitted in a single brick wall

Brass letterplate

Brushed chrome letterplate

Textured black letterplate

Polished chrome letterplate

LS14 Letterbox Dimensions

The Jubilee mailbox is designed to be installed into brick walls or brick piers up to 1000mm thick. The dimensions of all the fittings are shown below.

Shown below are the dimensions of all the Jubilee postbox models. Dimensions are in mm

	Letter plate These are the dimensions of the post flap supplied with the LS14. This post flap is shown in textured black but is also available in brass and polished or brushed chrome. A = 305mm, the overall height of the letterplate. B = 96mm, this dimension is the overall width of the letterplate. C = 57mm, the width of the letterplate orifice. D = 233mm, the height of the letterplate orifice
	Single wall and brick piers chute assembly The single wall chute dimensions are shown below, the chute can accommodate wall thicknesses between 100mm and 112mm. The postflap above is not shown fitted, but when assembled it is attached to the front of the sleeve. This sleeve is used for all depths. H = 248mm, the overall height of the sleeve, the hole in the brickwork would need to be approximately 82mm. W = 78mm, this dimension is the overall width of the chute, the hole in the brickwork should be around 252mm.
	Collection Box The collection is located within the cavity area when fitted into a brick wall or pier, for a double or cavity wall the box is located at the rear. A = 250mm, the height of the opening for a single wall depth chute. B = 80mm, the width of the opening. D = 242mm, the overall depth of the standard size collection box, used for single, double or cavity brick walls. See below for details of sizes for cases to fit deeper walls or piers. H = 425mm, the overall height of the collection box. W = 295mm, this dimension is the overall width of the collection box. X = 123mm, the distance from the bottom of the letterbox casting to the bottom of the letter opening
	Collection Box Sleeve Shown below are the dimensions of the inner sleeve of the standard size collection box. A = 402mm, the distance between the bottom face of the sleeve and the top of the apex, the overall height of the letterbox sleeve is taller as the sides extend below the bottom by 13mm making a total depth of 425mm. These extensions to the sides are generally bedded into the mortar when being built into a brick wall or pier. B = 383mm, the distance between the bottom of the sleeve to the top of the side before the apex begins. The apex of the sleeve rises 20mm from the side to the peak in the centre. C = 397mm, the dimension of the side of the sleeve from the very bottom to the lower point of the top apex. D = 230mm, the depth of the standard size sleeve. See below for details of sizes for cases to fit deeper walls or piers. E = 275mm, this is the width of the sleeve. F = 13mm, this dimension is the distance between the bottom of the sides and the floor of the mailbox sleeve.
	Rear Access Door Below are the dimensions of the rear access door of the LS10 Stamford rear retrieval postbox. A = 180mm, this is the width of the rear retrieval doorway B = 185mm, this is the height of the rear door entrance The diagonal distance of the letterbox opening is 257mm, easily big enough to remove A4 or large packages. A telephone directory sized package can be removed from the letterbox without needing to be bent in any way.
	Sleeves for deeper walls The standard case size is designed for single, double or cavity walls and 1½ brick* walls or piers. In addition we have standard size cases for 2, 2½ and 3 brick* walls. For other depth walls or piers we will need to manufacture a sleeve to suit. To make the correct size we require two dimensions as shown below. A, the thickness of the brick (this is 102mm for a standard metric brick). B, the overall depth of the wall or pier from the outside faces. * Based on a standard metric brick (215mm)